Hyundai Santa Fe: Battery
High Mounted Stop Lamp. Repair procedures Components and Components Location Floor Console Assembly. Repair procedures
When the wipers no longer clean adequately, the blades may be worn or cracked, and require replacement. CAUTION To prevent damage to the wiper arms or other components, do not attempt to move the wipers ...
Blade replacement
Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or terminal grease. Rinse any spilled electrolyte ...
For best battery serviceSee also:
Removal High Mounted Stop Lamp 1. Disconnect the negative (-) battery terminal. 2. Remove the rear spoiler. 3. Remove the high mounted stop lamp assembly (A) after loosening screws (4EA). Installation ...
Component Location 1. Fuel filler door open switch 2. Fuel filler door release actuator ...
Replacement [Console rear complete assembly] [M/T] • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the ...
