Hyundai Santa Fe: Cluster Fascia Panel. Components and Components Location - Crash Pad - Body (Interior and Exterior)Hyundai Santa Fe: Cluster Fascia Panel. Components and Components Location

Hyundai Santa Fe DM 2013-2018 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel. Components and Components Location

Component Location

1. Cluster fascia upper panel


Components and Components Location
Components (1) 1. Main crash pad assembly 2. Crash pad side cover [LH] 3. Crash pad side cover [RH] 4. Steering column shroud lower panel 5. Crash pad lower panel 6. Fuse box cover 7. Crash pad under cover ...

Cluster Fascia Panel. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Engine Cover. Repair procedures
Removal and Installation 1. Remove the engine cover (A). 2. Install in the reverse order of removal. ...

Torque Converter Control Solenoid Valve (T/CON_VFS). Description and Operation
Description Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

Injector. Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the injector connector. 3. Measure resistance between the injector terminals 1 and 2. 4. Check that the resistance is within the specification. ...