Hyundai Santa Fe: Cowl Cross Bar Assembly. Components and Components Location - Crash Pad - Body (Interior and Exterior)Hyundai Santa Fe: Cowl Cross Bar Assembly. Components and Components Location

Component Location

1. Cowl cross bar assembly



Main Crash Pad Assembly. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Cowl Cross Bar Assembly. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

See also:

Fuel Filler Door Open Switch. Repair procedures
Inspection 1. Remove the front door trim. 2. Disconnect the switch connector (A) from wiring. 3. Check the switch for continuity between the No. 1 and No. 2 terminals. If the continuity is not as specified, ...

Rear Coil Spring. Repair procedures
Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque : 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the rear ...

Line Pressure Control Solenoid Valve. Schematic Diagrams
Circuit Diagram ...