Hyundai Santa Fe: Forward and backward - Front seat adjustment - Power - Seats - Safety features of your vehicleHyundai Santa Fe: Forward and backward

1. Push the control switch forward or backward to move the seat to the desired

1. Push the control switch forward or backward to move the seat to the desired position.
2. Release the switch once the seat reaches the desired position.

Front seat adjustment - Power
The front seat can be adjusted by using the control knobs located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the steering wheel, ...

Seatback angle
1. Push the control switch forward or backward to move the seatback to the desired angle. 2. Release the switch once the seat reaches the desired position. Seat height (for driver’s seat) 1. Pull the ...

See also:

35R Clutch Control Solenoid Valve(35R/C_VFS). Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Remove the air duct. 3. Disconnect the solenoid valve connector(A). 4. Measure resistance between sensor signal terminal and sensor ground terminal. 5. Check ...

Closing the fuel filler lid
1. To install the cap, turn it clockwise until it “clicks” one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it in lightly making sure that it is securely ...

Oil Level Gauge & Pipe. Repair procedures
Removal and Installation 1. Remove the oil gauge(A). 2. Remove the intake manofold. 3. Remove the oil level pipe(A). Tightening torque : 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 4. Install in ...