Hyundai Santa Fe (DM): Front Door Inside Handle. Repair procedures - Front Door - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Door Inside Handle. Repair procedures

Replacement

1.
Remove the front door trim.
2.
After loosening the mounting screws, then remove the front door inside handle (A).
3.
Install in the reverse order of removal.
•
Make sure the door locks/unlocks and opens/closes properly.
•
Replace any damaged clips.

Front Door Trim. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...

Front Door Window Glass. Components and Components Location
Component Location 1. Front door window glass ...

See also:

Interior light
CAUTION Do not use the interior lights for extended periods when the engine is not running. It may cause battery discharge. WARNING Do not use the interior lights when driving in the dark. Accidents could ...

Engine compartment panel fuse replacement
1. Turn the ignition switch and all other switches off. 2. Remove the fuse box cover by pressing the tab and pulling up. 3. Check the removed fuse; replace it if it is blown. To remove or insert the fuse, ...

Repair procedures
Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Check for continuity between the terminals. 3. If continuity is not specified, ...