Hyundai Santa Fe (DM): Front Seat Belt Buckle. Components and Components Location - Front Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe (DM): Front Seat Belt Buckle. Components and Components Location

Component Location

1. Front seat belt buckle



Height Adjust. Repair procedures
Replacement 1. Remove the front seat belt upper anchor. 2. After loosening the mounting bolts, then remove the height adjust (A). Tightening torque : 39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) ...

Front Seat Belt Buckle. Repair procedures
Replacement 1. Remove the front seat assembly. 2. Disconnect the front seat belt buckle connector wiring (A). 3. After loosening the mounting nut, then remove the front seat belt buckle (A). Tightening ...

See also:

Repair procedures
Valve Clearance Inspection And Adjustment Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder head is installed on the cylinder block. ...

Movable Glass. Repair procedures
Replacement 1. Tilt the rear part of the movable glass (A) using the panorama sunroof switch. 2. Remove both sides of the decoration cover (A). 3. Loosen the mounting screws (A) on both sides. • Be careful ...

Start/Stop Button. Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the driver crash pad lower panel. 3. Disconnect the start/stop button connector (B) after removing the center fascia garnish (A). 4. Remove ...