Hyundai Santa Fe: Fuel Pump Motor. Repair procedures
Removal
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
| 2. |
Disconnect the fuel sender connector (A).
|
| 3. |
Release the fixing hooks, and then remove the fuel sender (A).
|
| 4. |
Release the fixing hooks (A), and then fuel filter & motor assembly
from reservoir cup.
|
Installation
| 1. |
Install in the reverse order of removal.
|
Fuel Filter. Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Release the fixing hooks, and then remove the fuel sender (A). 4. Release ...
Fuel Sender. Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Release the fixing hooks, and then remove the fuel sender (A). Installation ...
See also:
Repair procedures
Valve Clearance Inspection And Adjustment Inspect and adjust the valve clearance when the engine is cold (Engine coolant temperature : 20°C (68°F)) and cylinder head is installed on the cylinder block. ...
Fuses
A vehicle’s electrical system is protected from electrical overload damage by fuses. This vehicle has 2 fuse panels, one located in the driver’s side panel bolster, the other in the engine compartment ...
Specifications
Specifications Items Specifications Rated voltage 5V Load Max. 1mA (When head lamp lighting) Illuminations (LUX) 50 1.42 ± 0.31V 100 2.63 ± 0.58V 150 3.84 ± 0.84V ...
