Hyundai Santa Fe: Knee Airbag (KAB) Module. Description and Operation - Airbag Module - RestraintHyundai Santa Fe: Knee Airbag (KAB) Module. Description and Operation

Description

The Knee Airbag (KAB) is installed inside the crash pad lower panel and protects the driver in the event of a frontal crash. The SRSCM determines if and when to deploy the KAB.
Never attempt to measure the circuit resistance of the airbag module (squib) even if you are using the specified tester. If the circuit resistance is measured with a tester, accidental airbag deployment will result in serious personal injury.

Curtain Airbag (CAB) Module. Repair procedures
Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim. 3. Disconnect the curtain airbag harness connector (A). 4. After loosening ...

See also:

Canister Close Valve (CCV). Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specification. Specification: ...

Forward and backward
1. Push the control switch forward or backward to move the seat to the desired position. 2. Release the switch once the seat reaches the desired position. ...

Components and Components Location
Components Location 1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band 8. Fuel tank pressure sensor (FTPS) 9. Canister close valve ...