Hyundai Santa Fe: Rear Door Module. Components and Components Location - Rear Door - Body (Interior and Exterior)Hyundai Santa Fe: Rear Door Module. Components and Components Location

Component Location

1. Rear door module



Rear Door Window Glass. Repair procedures
Replacement 1. Remove the rear door trim. 2. Remove the rear door belt inside weatherstrip (A). 3. Pull down rear door window glass by pressing the power window glass switch. 4. After loosening the mounting ...

Rear Door Module. Repair procedures
Replacement 1. Remove the rear door window glass. 2. Remove the rear door outside handle. 3. Disconnect the rear door main connector (A). 4. Loosen the rear door outside handle base mounting bolt (A). ...

See also:

Checking the coolant level
Removing radiator cap Never attempt to remove the radiator cap while the engine is operating or hot. Doing so might lead to cooling system and engine damage and could result in serious personal injury ...

Pressure Sensor. Description and Operation
Description The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an oil pressure. And then it presses a multiple disk clutch and transfers the generated torque into rear wheels. Its torque ...

SRS components and functions
The SRS consists of the following components: 1. Driver's front air bag module 2. Passenger's front air bag module 3. Side impact air bag modules 4. Curtain air bag modules 5. Retractor pre-tensioner ...