Hyundai Santa Fe: Tail Gate Weatherstrip. Repair procedures - Tail Gate - Body (Interior and Exterior)Hyundai Santa Fe: Tail Gate Weatherstrip. Repair procedures

Replacement

1.
Remove the tail gate weatherstrip (A).
•
Do not apply sealant to the body.

2.
Install in the reverse order of removal.
•
Install the weatherstrip aligned with canter line (B).

Tail Gate Lift. Repair procedures
Replacement • Take care to not let the tailgate fall on you as the lifts are removed. Have a helper hold the tailgate open, or use a secure method to hold it open. 1. Using a screwdriver (A), lift up ...

See also:

Engine Control Module (ECM). Schematic Diagrams
ECM Terminal And Input/Output signal ECM Terminal Function Connector [C100-A] Pin No. Description Connected to 1 Ignition Coil (Cylinder #2) control output [NON-smart key type] Ignition Coil (Cylinder ...

Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under severe driving conditions. Refer to the chart below for the appropriate maintenance intervals. R : Replace I : Inspect and, ...

Repair procedures
On-vehicle Inspection Inspect ignition coil assembly and Perform spark test 1. Check for DTCs. • If a DTC is present, perform troubleshooting in accordance with the procedure for that DTC. (Refer to ...