Hyundai Santa Fe (DM): ICM (Integrated Circuit Module) 
Relay Box. Components and Components Location - Fuses And Relays - Body Electrical SystemHyundai Santa Fe (DM): ICM (Integrated Circuit Module) Relay Box. Components and Components Location

Component


Relay Box (Passenger Compartment). Repair procedures
Fuse Inspection 1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each circuit correct? 3. Are there any blown fuses? If a fuse is to ...

ICM (Integrated Circuit Module) Relay Box. Description and Operation
Description The ICM relay is united with (rear blower motor, cornering lamp, rear fog lamp, two turn unlock, burglar alram relay) which installed inside the lower crash pad. ...

See also:

Hood
Repair procedures Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up and down or from side to side and tighten the bolt. 2. Adjust the hood height by moving ...

Rail Pressure Sensor (RPS). Specifications
Specification ...

Fuel Tank Pressure Sensor (FTPS). Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the FTPS. Specification: Refer to "Specification" Removal 1. Turn the ignition switch OFF and ...