Hyundai Santa Fe: ICM (Integrated Circuit Module)
Relay Box. Description and Operation
Description
ICM (Integrated Circuit Module)
Relay Box. Repair procedures
Inspection Rear Blower Motor relay Check for continuity between the terminals. 1. There should be continuity between the No.16 and No.15 terminals when power and ground are connected to the No.13 and No.14 ...
See also:
Front Driveshaft. Components and Components Location
Components 1. Front driveshaft (LH) 2. Inner shaft bearing bracket 3. Front driveshaft (RH) [LH] 1. BJ assembly 2. Clip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ ...
Side Impact Sensor (SIS). Description and Operation
Description Side Impact Sensor (SIS) system consists of two Pressure Side Impact Sensor (P-SIS) which are installed at each center of the front door module (LH and RH) and two SIS which are installed at ...
Reprogramming a single HomeLink® button
To program a new device to a previously trained HomeLink® button, follow these steps: 1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has been completed. 2. When the indicator ...