Hyundai Santa Fe: Rear Center Seat Belt Retractor. Components and Components Location - Rear Seat Belt - Body (Interior and Exterior)Hyundai Santa Fe: Rear Center Seat Belt Retractor. Components and Components Location

Component Location

1. Rear center seat belt retractor



Rear Seat Belt Retractor. Repair procedures
Replacement [Second row seat belt assembly] • When installing the belt, make sure not to damage the retractor. 1. Remove the rear pillar trim. 2. After loosening the mounting bolt, then remove the second ...

Rear Center Seat Belt Retractor. Repair procedures
Replacement • When installing the belt, make sure not to damage the retractor. 1. Remove the second row seat back cover [LH]. 2. Loosen the rear center seat belt lower anchor mounting bolt (A). Tightening ...

See also:

Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications
Specifications Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81~500.14 (0.1~5.1,1.42~72.54) Current value(mA) 50~850 Internal resistance(Ω) ...

Front Driveshaft. Components and Components Location
Components 1. Front driveshaft (LH) 2. Inner shaft bearing bracket 3. Front driveshaft (RH) [LH] 1. BJ assembly 2. Clip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ ...

Cowl Cross Bar Assembly. Repair procedures
Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage. • ...