Hyundai Santa Fe: Rear Seat Belt
Mode selection Multi fuse Relay Box (Engine Compartment). Repair procedures
Replacement 1. Remove the front seat assembly. 2. Disconnect the front seat belt buckle connector wiring (A). 3. After loosening the mounting nut, then remove the front seat belt buckle (A). Tightening ...
Front Seat Belt Buckle. Repair procedures
Component Location 1. Second row seat belt retractor 2. Third row seat belt retractor ...
Rear Seat Belt Retractor. Components and Components LocationSee also:
The mode selection button controls the direction of the air flow through the ventilation system. Face-Level (B, D, F) Air flow is directed toward the upper body and face. Additionally, each outlet can ...
If the multi fuse is blown, it must be removed as follows: 1. Disconnect the negative battery cable. 2. Remove the bolts shown in the picture above. 3. Replace the fuse with a new one of the same rating. ...
Inspection 1. Disconnect the negative (-) battery terminal. 2. Pull out the relay from the engine compartment relay box. Power Relay (Type A) Check for continuity between the terminals. A : Power outlet ...
