Hyundai Santa Fe: BCM (Body Control Module)
Head Lamp Leveling
Actuator. Repair procedures Idler. Repair procedures Heated Repair procedures
Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red light doesn't flicker. Standard ...
Transmitter. Repair
procedures
Specifications Items Specifications Rated voltage DC 12V Operating voltage DC 9 ~ 16V Operating temperature -30°C ~ 75°C (-4°F ~ 158°F) Dark current Keyless type : 5.5 mA Non keyless type : 3.0 mA ...
SpecificationsSee also:
Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. Below content summarize the procedure for A/S using GDS. No. Procedure 1 Locate vehicle to flat plane 2 Tire check 3 IGN1 ...
Removal and Installation 1. Remove the drive belt. 2. Remove the idler(A). Tightening torque : 53.9 ~ 63.7 N.m (5.5 ~ 6.5 kgf.m, 39.8 ~ 47.0 lb-ft) Check the idler. if it is grease leak or abnormal rotation, ...
Inpection 1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kΩ Â± 10% (25°C) B. Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 Ω Â± 10% 2. Measure ...
