Hyundai Santa Fe: Hydraulic System
Rear Oil Seal. Repair procedures Immobilizer Control Unit. Repair
procedures SS-B Solenoid Valve(ON/OFF). Description and Operation
Removal 1. Remove the engine cover. 2. Remove the air cleaner assembly and air duct. 3. Remove the battery and battery tray. 4. Disconnect the inhibitor switch connect (A) and solenoid valve connector ...
Automatic Transaxle. Repair procedures
Description The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves). The oil pump is powered by the engine. ATF passes through the oil filter and ...
Description and OperationSee also:
Removal 1. Remove the automatic transaxle. 2. Remove the drive plate. 3. Rmove the rear oil sela(A). Installation 1. Install rear oil seal. (1) Apply engine oil to a new oil seal lip. (2) Using SST(09231-H1100, ...
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the driver crash pad lower panel. 3. Remove the knee airbag module. 4. Disconnect the connector of the immobilizer unit and then remove ...
Description SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...
