Hyundai Santa Fe: Rear Suspension System
DBC Switch. Repair procedures Flex Steer. Components and Components Location Master Cylinder. Components and Components Location
Removal 1. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft) Be careful not to damage to the hub bolts when removing the front ...
Sub Frame. Repair procedures
Components 2WD 1. Rear upper arm 2. Rear stabilizer bar 3. Rear lower arm 4. Rear assist arm 5. Rear shock absorber 6. Rear cross member 7. Trailing arm 4WD 1. Rear assist arm 2. Rear cross member 3. Rear ...
Components and Components LocationSee also:
Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the crash pad side switch assembly (A) after loosening the screws. 4. ...
Components Location 1. Flex steer switch ...
Components 1. Reservoir cap 2. Reservoir 3. Grommet 4. Master cylinder ...
