Hyundai Santa Fe: AVN System
Parking Brake Cable. Repair procedures Repair procedures Fuel Pressure Control Valve. Troubleshooting
Removal 1. Remove the front bumper cover. 2. Remove the bolts and disconnect the horn connectors, then remove the high pitch horn (A) and low pitch horn (B). [Disk type] [Shell type] Installation 1. Install ...
Repair procedures
Specifications Item Specification Power source DC 14.4V (-) ground Frequency range / Channel space FM : 87.5 ~ 107.9 MHz / 200 KHz AM : 530 ~ 1710 KHz / 10 KHz Tuning type PLL SYNTHESIZED TUNING Impedance ...
SpecificationsSee also:
Removal Parking brake pedal Type 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. 3. Remove the parking brake cable mounting nut (A) and bolts(B). ...
Replacement [Removal] • Put on gloves to protect your hands. • Use seat covers to avoid damaging any surfaces. 1. Remove the front pillar trim. 2. Remove the cowl top cover. 3. Using a screwdriver ...
Signal Waveform ...
